3/25/2023 0 Comments Wizard pro flashlight![]() It's probably long enough to check water resistance in 99% of the situations. Well, looking for positives, it is healthier for Li-Ion batteries not to be 100% charged. And remember that we don't always have the battery discharged to a minimum, so the charging time will be shorter. Optimal current, good for night charging. We put this part to the socket,Īnd stick the other part to our magnetic tailcapĬharging with 0.7A current, about 8 hours to full charge, cut-off current about 80mA. I will check if it still shines and drains our battery after couple of days.Įdit: It turns off at 2,9V after some timeĪ good idea, because the threads and O-rings are not damaged by screwing and unscrewing, and everything is very simple. You should notice that the light did not turn off itself, but remained at a very low level. The battery level is indicated by a flashing switch LED in different colors, everything is described in the instructions. There are other interesting functions described in the manual, such as switching on the battery charge indicator or access to the tactical mode - the last memorized mode lights up momentarily only when you press the button. For me, the message is clear: This is not the headlamp for an amateur to get from car to home or use only in the basement. It is complicated, but after learning very universal and practical. Despite so many modes, we can always have exactly what we want, right away. To every group we have instant access from any position, which I respect very much. If we want to have Firefly modes, from the Main group we make 2 clicks, or from the off position we hold it. 4 click from each position turns on strobes 3 click from each position turns on Turbo 2 click in the Main group turns on Firefly. 2 click from each position (on, off) turns on the Main group. For example, releasing the switch on the last one, Turbo 900lm, blocks us in the Turbo group, and pressing and holding switch allows us to change the mode from 900lm to 1800lm. Releasing the button at any brightness level locks us in the group to which this brightness belongs. From the off position, pressing and holding always activates the lowest mode and cycle up to Turbo 900lm, over and over again (if we press the switch all time). We have 4 groups of modes to choose from:ģ Firefly group modes (0.15lm-1.5lm-5.5lm)Īccess to the first 3 groups is in two ways: And besides, the best way to learn is to practice, not to read and learn from the instruction.ġ click on, 1 click off, in on position press and hold to change modes Good cells.Įverything explains the instructions, but I will tell you how I understood it. It's not such a high drain.Īnd besides, these are LG MH1 batteries in Armytek wrapping. Ok they have these batteries on the page, it says discharge current up to 3.7A. (Just to point out, I am not making fun of Natalia, I just make fun of this situation, come on, everyone can misunderstand something from time to time) It says "The ability to work even under heavy load", but nothing specific what "heavy load" is. Cap with strong magnet and space for a charger.Ī big spring, really presses the battery after tightening, the cell will not rattle, no matter what.Īrmytek 18650, 11,8Wh 3200mAh. Battery tube, 2 o-rings at the end and very well greased threads. there's a diode in the head! Ah, it's so easy to forget :P XHP50 neutral white, on the packaging we see the inscription 2300 LED lumens,īut in the instructions the manufacturer honestly admits that it is really 1800lm. We have a heat sink to help dissipate heat. If you are a fan of Armytek Wizard, you absolutely must have this gadget Head with steel ring, TIR optics, like honeycomb Product may be collected from our warehouse.Weight: with battery 111g, so satisfying to see.Freight will be charged separately to your order. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |